Features

• 6 audio inputs

• Two independent 3-input mixer

• Sum of all 6-inputs

• Soft tube overdrive

Use the Fusion Mixer as two independent 3-input mixers (also for stereo signal mixing) or a 6-input mixer. Special feature of the Fusion Mixer – great tube overdrive effects when level knobs are set to 3 o’clock or above. When used with drum machines, it even emulates sidechain compressors. When used to mix signals from VCOs Fusion Mixer it works as waveshaper, especially, if pulse width modulated pulse signals is used in one of inputs.
 

All Fusion modules by default are configured to work with regular eurorack PSU.

Due to the fact that cold tube heaters have lower resistance, Fusion modules have significant power consumption peak at startup, when power consumption almost doubles for 1-2 seconds. This is not a problem with linear PSUs that have power inertia, but may cause switching PSU internal protection to turn off power supply. Please make sure your PSU has some headroom before installing multiple Fusion modules.

If you need a 6 to 6 pin  power cable included to your order (suitable for 6VAC PSU), please write that in the comment section during checkout process.

Technical specifications:
 

Input signal level up to 20V ptp

Output signal level 10V ptp

Mixer GAIN 1

Power supply bipolar +-12V , eurorack standard 

Power consumption Eurorack PSU configuration: 160mA@+12V, 10mA@-12V

Module width 14HP

Module depth 25mm